Loading...
-
Carefully remove the spare wheel center cap.
-
- Insert the spare wheel protector key into the lock and turn 90° to the left.
- Remove the spare wheel protector lock.
-
- Insert the spare wheel protector tool.
- Insert the allen key into the spare wheel protector tool and fully release the center bolt.
-
Remove the spare wheel protector module.
-
Remove the spare wheel protector retention ring.
-
If installing for the first time, remove the spare wheel center cap.
-
CAUTION:
Make sure the spare wheel protector is correctly aligned and installed, as illustrated.
Install the spare wheel protector retention ring.
-
CAUTION:
Failure to perform this step could result in the spare wheel protector being incorrectly installed and damage the surrounding components.
Observe and note the alignment marks on the spare wheel protector retention ring and spare wheel protector module.
-
Offer up the spare wheel protector module to the spare wheel, as illustrated.
-
- Insert the spare wheel protector tool.
- Insert the allen key into the spare wheel protector tool and fully tighten the center bolt.
-
- Install the spare wheel protector lock.
- Insert the spare wheel protector key into the lock and turn 90° to the right.
-
NOTE:
Make sure the wheel cap logo lines up horizontally.
Carefully install the spare wheel center cap.
- Make sure the spare wheel protector key(s), tool, allen key and key card (if installing for the first time) are stowed in the vehicle.
Z3Vlc3Q7MjAyNC0wNS0wOVQxMDo0OTo0Ny4zNDBaOzMuMTM3LjIxMy4xMjg7
Scanning barcode and converting to serial number...